Position:Home >> News  >> Industry trends

The failure of the electrolyte of the water meter will lead to the work of the water meter can not be carried out, in which the production cost is increased, the production efficiency is reduced, and the production continues to be affected. After analyzing the causes of the failure of the electrolyte of the water meter, it is found that the following three conditions are likely to fail.

(1) the electrolyte used for more than one month;

(2) the electrolyte color becomes deep (not under the iodine state);

(3) the measuring electrode plug of the electrolytic cell is inserted into the measuring socket of the host machine, and the electrolytic electrode plug is inserted into the electrolytic socket of the host machine. Shake a few pool, open the electrolysis, stirring button. If this is in a state of iodine, with 50? 1 into the injector extraction amount of water injected electrolysis cell (the needle should be inserted into the liquid), always observe the electrolyte of color, until you start counting. Turn off the stirring, even shake the electrolytic tank, so that the air in the electrolytic tank and the electrolyte to fully respond to water, and then open the mixing, so that the instrument to reach the end, you can carry out a sample test. However, if the electrolyte fails, the electrolysis process is difficult to reach the end after repeated shaking of the electrolytic cell in the previous step.

In order to ensure the smooth progress of production, production efficiency has been improved, in the production process should always pay attention to the change of water meter electrolyte, at any time to prevent unnecessary time to waste.

Shandong Songzheng Instrument Co. Ltd. copyright 2016 Tel: 0533-3193188